EMT Practice Test

1. Question Content...

---

Question1: What is the maximum aggregate traffic available to a half-width UCS B-Series blade in a 5108 Chassis with two 2208XP Fabric Extenders, Cisco VIC 1240 adapter, and Cisco Port Expander Card for VIC 1240?

Question2: You have multiple clients that want to use FC. You want to ensure that data is kept separate across a FlexPod deployment.
In this scenario, which two constructs would you use to accomplish this task? (Choose two.)

Question3: What must be done in order to add a user to the appliance database, which two of the following you must enter?

Question4: Which of the following tools is designed to inventory existing VMware vSphere, Linux, and Microsoft Windows Server versions in a customer environment?

Question5: Which feature is supported for virtual machines configured with Direct Path I/O using Cisco Virtual Machine Fabric Extender (VM-FEX) distributed switches?

Question6: A customer is deploying a FlexPod Datacenter and planning to boot from SAN each their UCS blades using the Fibre Channel Protocol.
In this scenario, which three actions would accomplish their objective? (Choose three.)

Question7: How do Cisco Fabric Interconnects in a FlexPod configuration share configuration information, status, and avoid "split brain" problems?

Question8: You have a customer that wants to deploy a new data center environment and take advantage of server portability. You propose that they use Cisco UCS servers to take advantage of stateless computing operations.
In this scenario, which Cisco UCS feature would help the customer achieve their objective?

Question9: Refer to the exhibit.

The numerals in the red rectangle, what will be this servers Boot from SAN order?

Question10: What are three ways to configure a UCS 5108 server chassis power supply? (Choose three.)

Question11: Via which of the following can the console password be changed?

Question12: You are developing a FlexPod solution with a MetroCluster IP as the storage solution.
In this scenario, which two components are supported? (Choose two.)

Question13: One of the access methods below will maintain boot messages right across all reboots, which one is it?

Question14: A customer wants to upgrade their current VMware vSphere 6.5 environment to vSphere 7.x.
Where would you go to determine which Cisco UCS configurations support this goal?

Question15: Your customer has a FlexPod configuration with a 4-node NetApp AFF A300 storage cluster that uses only NSE drives.
Which two solutions allow the customer to expand the current storage system? (Choose two.)

Question16: An administrator decides to connect storage directly to the UCS Fabric Interconnect to support FCoE within a FlexPod configuration.
In this scenario, which port type should be defined on the Fabric Interconnect ports connected to the storage controller?

Question17: FlexPod Datacenter with Cisco UCS Mini supports which Fabric Interconnect model?

Question18: What are the 1U, rack mountable, Fabric Extenders (FEX) used for in a FlexPod environment?

Question19: A(n) _____ VIF combines two physical interfaces into a single virtual interface where traffic is active on both physical interfaces.

Question20: Which UCS Manager feature will allow you to have a consistent server configuration within the system?

Question21: You received from a customer the requirements shown below.
25 servers
25GbE connectivity
NFS and iSCSI protocols
30 TB flash storage
50 TB hybrid storage
In this scenario, which FlexPod solution would satisfy the requirements?

Question22: A customer must connect a VMFS datastore for a virtualized application.
Which type of connection should be configured in this scenario?

Question23: The backup/restore options in the Maintenance section of the Appliance Manager are used to backup and restore _____.

Question24: In a FlexPod design, when can NetApp storage be directly connected to a Cisco UCS server?

Question25: You are asked to design an application-focused data center using policy-based networking.
Which architecture is valid for this new design?

Question26: The system messages are _____.

Question27: A customer has configured a FlexPod solution and is experiencing issues with connectivity from the Cisco Nexus switches to the NetApp AFF controllers. The customer must verify connectivity using the FC protocol.
What are two ways to troubleshoot this problem? (Choose two.)

Question28: You have taken over management of an existing FlexPod system as part of a new job role. You want to find details of existing support and service contracts available for the system.
Which two resources would you use to find this information? (Choose two.)

Question29: Which two NetApp storage controllers would be used in a valid FlexPod Datacenter configuration? (Choose two.)

Question30: You want to modernize a data center with stateless computing within a FlexPod. You are going to use UCS service profiles.
Which two statements are true in this scenario? (Choose two.)

Question31: A client has a FlexPod Datacenter solution with four active fabric links in port channel mode established between the Cisco Fabric Interconnects and the IOMs on a Cisco 5108 blade chassis.
The blade chassis is fully populated with Cisco UCS B200M5 blades. A worker in the data center inadvertently unplugs the fourth uplink cable from IOM-A while working in the rack.
In this scenario, what happens to the network traffic?

Question32: You are sizing a FlexPod Datacenter solution for multitenancy use.
What are two important platform scaling considerations in this scenario? (Choose two.)

Question33: State whether the following statement is true or false. The flush cache command does not reduce disk space utilization.

Question34: An administrator deployed a new virtual machine and now wants to track disk performance of the virtual machine.
Which three tools would be used in this scenario? (Choose three.)

Question35: You want to direct-connect NetApp storage to a UCS Mini over IP.
In this scenario, which storage protocol is supported?

Question36: A customer wants to monitor and analyze workloads for all of their NetApp ONTAP clusters including the storage system from their FlexPod environment.
In this scenario, which two tools would satisfy this requirement? (Choose two.)

Question37: Which two statements are true about VMware vCenter Server capabilities? (Choose two.)

Question38: A customer wants to replace their Cisco UCS 6248UP with the current Cisco UCS 6454. They are currently using six 16 Gbit uplinks per Fabric Interconnect for FC and do not want to change the speed and number of ports used.
In this scenario, what is the minimum number of unified ports that must be configured for FC for a comparable configuration?

Question39: You want to ensure optimum Layer 2 latency and performance for server-to-server communications when configuring high availability for bare-metal operating systems.
In this scenario, which action would you perform to accomplish this task?

Question40: Your customer has a FlexPod implementation and wants to use life-cycle management to validate, monitor, and optimize the FlexPod infrastructure.
In this situation, which management tool should your customer use?

Question41: Network Appliance field alerts _______ and _________.

Question42: A customer is designing a FlexPod with VMware vSphere 6.0 using a two-node AFF8040 cluster. The virtualization layer will contain both iSCSI and NFS workloads. All workloads mustbe highly available with no downtime.
The workloads must be able to use multiple data paths. In this scenario, which capability allows for SAN LIFs to be highly available across all nodes in the cluster?

Question43: A customer is designing a FlexPod solution with VMware 6.x in a SAN boot environment using FCoE. The customer has predetermined the WWPN values for the NetApp LIFs and the UCS vHBAs. The customer is now working on the design workflow for the SAN boot process.
In this scenario, which three FlexPod environment objects are required for SAN connectivity? (Choose three.)

Question44: You are creating a FlexPod with a significant AI workload and would like to use NVIDIA's SXM2-based GPUs.
Which Cisco UCS server would you use in this scenario?

Question45: A customer wants a FlexPod solution that is designed for high performance applications and that will support
32 Gbps Fibre Channel block storage.
In this scenario, which two components should you recommend to the customer? (Choose two.)

Question46: Which tool may be used to determine the optimal UCS hardware configurations for SAP, Oracle, and Microsoft Enterprise Applications FlexPod solutions?

Question47: What happens when the diag dump command is executed?

Question48: Product documentation is available on the appliance and at ______

Question49: If the auth ftp command is used in a proxy configured environment, the appliance will _____

Question50: You are configuring Cisco UCS servers for FC SAN boot and want to perform zoning on your Cisco Nexus 5000 series switches.
In this scenario, which statement is correct?

Question51: You are asked to ensure link redundancy to your hosts using Virtual Port Channel (vPC). You are creating a vPC on a pair of Cisco Nexus switches.
In this scenario, which two steps are required to accomplish this task? (Choose two.)

Question52: Which two features are supported with vSphere 6 Standard edition? (Choose two.)

Question53: Exhibit 1:


Exhibit 2:

Referring to the exhibit, UCS Fabric Interconnect 6300-A fails as shown in Figure 1. Due to the storage LIF configuration, after UCS Fabric Interconnect 6300-A is restored, traffic flows as shown in Figure 2.
To enable this capability, on which two UCS port types should storage VLANs be accessible? (Choose two.)

Question54: Which guide ensures that the NetApp hardware and software components are supported with the version of Data ONTAP that you plan to install?

Question55: You are asked to configure your company's new Cisco MDS switch so that the engineering department's FC storage traffic is logically isolated from the marketing department's traffic.
In this scenario, what will accomplish this task?

Question56: The _____ command displays performance statistics, such as the current CPU usage, the amount of network I/O, and the amount of disk I/O.

Question57: A customer wants to deploy a FlexPod Datacenter solution that supports a secure multitenant design with VMware vSphere 6.x as the hypervisor. The customer wants to ensure that virtual machines are encrypted in transit and at rest and restricted to their specified tenant.
Which component should the customer use to implement this capability?

Question58: Which sends support summary information to NetApp through HTTPS?

Question59: A customer wants to deploy a FlexPod solution that involves directly connecting the NetApp AFF storage using the FCoE protocol to the Cisco UCS Fabric Interconnects.
In this scenario, which Cisco UCS Fibre Channel mode would be used to accomplish this task?

Question60: When using Virtual Port Channel (vPC) on a Nexus 5500 switch, what protocol is responsible for synchronization of configuration, spanning tree, MAC and VLAN information?

Question61: A complete listing of Network Appliance support centers is available at _____.

Question62: Which one of the following access methods will maintain boot messages across reboots?

Question63: A customer has reviewed the latest vSphere CVD and asks you if they can use their older Cisco servers in the new FlexPod solution and still have supported configuration.
Which statement is true in this scenario?

Question64: Which two support account levels are minimally required when you deploy a FlexPod Datacenter solution?
(Choose two.)

Question65: What will happen as a result of executing the following ACL?
redirect "www.mycorp.com" url www.netapp.com

Question66: You want to use Cisco UCS Manager on the Fabric Interconnects to manage attached C-Series servers.
Which two connection topologies would satisfy the requirements? (Choose two.)

Question67: Which of the following statements most accurately describes what would occur if she requested for www.microsoft.com considering the following ACL policies, assuming user Johnny is a member of the Engineering group?
- deny group Engineering and smartfilter gambling
- auth any
- allow group Execs
- deny any

Question68: State whether the following statement is true or false. All defective parts require a RMA before to sending the product to Network Appliance.

Question69: What syntax is used to get an extensive help definition for a particular command?

Question70: Which item is an example of Role-Based Access Control and multi-tenancy support that can be applied to a UCS environment using the Cisco UCS Manager?

Question71: Which Microsoft Hyper-V and System Center VMM feature allows for creation of multiple VM networks on top of a logical network and allows for tenant use of overlapping IP addresses?

Question72: The traceroute command is used to ____.

Question73: Your customer wants to change from local boot to SAN boot for the compute layer.
What must be present on the network layer to meet the customer's design change?

Question74: A customer wants to refresh their FlexPod solution by moving from 10 Gbps to 40 Gbps networking. They use FCoE to boot from SAN.
In this scenario, which statement is true?

Question75: With Data ONTAP 8.1.2, what must be upgraded to the latest firmware to take advantage of the latest updates available for the remote management device?

Question76: The ___ command is used to run automated diagnostic analysis routines.

Question77: One of the services below cannot be categorized as a service supported by ICAP, which option is it?

Question78: Refer to the exhibit.

Following FlexPod recommended practices, which portchannel configuration is valid for the connectivity shown?

Question79: What is the traceroute command used for?

Question80: A customer is performing a server refresh of their FlexPod solution to accommodate business growth. The customer is interested in using Cisco C-Series servers, and supporting multiple 40 Gbps link to each server, upgrading from the existing 10 Gbps links.
Which two VICs support these requirements? (Choose two.)

Question81: All of the following are supported interface types EXCEPT _______.

Question82: Which of the following TWO statements are FALSE?

Question83: A customer deployed a FlexPod Datacenter solution six months ago that included Cisco UCS 6332 Fabric Interconnects with the default port license enabled. They will be performing an upgrade to the system which requires a reboot of the Fabric Interconnects (FI) and they want to ensure that the servers are available after the reboot.
In this scenario, how many ports on the FI will be active after the reboot?

Question84: What is the NetApp recommended bit length that the SSL key should be?

Question85: When configuring a FlexPod environment for iSCSI boot with Cisco UCS, which item should be preconfigured?

Question86: The FlexPod Data Center with VMware vSphere 5.1 solution utilizes a clustered file system that allows multiple hosts simultaneous read and write access to a single volume.
What is the name of this file system?

Question87: What software program manages a NetApp storage controller with Data ONTAP 8.1 or later?

Question88: A customer has a FlexPod configuration that supports FC and uses Cisco MDS switches. The customer wants to add a 48-Port 32 Gbps Advanced Fibre Channel Switching blade to support both 32 Gbps FC and 32 Gbps NVMe-oF.
In this scenario, which Cisco switch is appropriate?

Question89: State whether the following statement is true or false. The sysstat command allows the performance statistics to be viewed, which consists of the present CPU usage, the full amount of network I/O, and the amount of disk I/O.

Question90: Which two types of Cisco UCS servers are available to be used with a FlexPod Express deployment? (Choose two.)

Question91: You are asked to evaluate SaaS-based monitoring solutions for your FlexPod environment. Other than being SaaS-delivered, selection criteria include full lifecycle management, environment automation, and the ability to monitor third-party storage that is salted for retirement.
In this scenario, which product satisfies the requirements?

Question92: Your customer has a FlexPod solution with a 2-node switchless ONTAP system, Cisco Nexus 93108 switches, and Cisco UCS B-Series servers. The customer wants to expand to a 4-node ONTAP storage cluster.
Which configuration is valid for expansion?